With Wi-Fi, the only range is your internet signal. If you get the internet at one side of your house / garden, you will be able to control this amplifier. Reliability & Connection - Wi-Fi is much more secure than Bluetooth so no unwanted connections can occur.
Wi-Fi is also much more stable and is less likely to drop signal or break up like Bluetooth. No need for a separate remote.Simply hide the amp away and you can control everything without needing line of sight. App is Compatible with ANDROID & iOS. Multi-Room / Zoning - The clever app allows you to set-up and control multiple amplifiers from a single device (app).
Depending on the level of music streaming service you use, you can also play different things in different zones at the same time and control all volumes separately. This is an incredibly versatile piece of kit and a fantastic alternative to SONOS. However, thanks to the latest, CLASS-D DIGITAL sound reproduction technology, this little stereo amplifier sounds much louder than the figures suggest... The amp can handle any domestic environment and most commercial environments (depending on the nature of the install). Size - Thanks to its compact size, this amplifier can be hidden out of sight in places such as above kitchen units & in ceiling voids.
Once set up and the power is connected, you don't need to touch it again to play music wirelessly. Connectivity - Not all devices have a Wi-Fi option such as CD players or TV's. Don't worry, this amplifier has an auxiliary input, it is also supplied with a connection cable to save you the hassle of ordering one.
As well as an Aux input, it also accepts Micro SD cards & USB input. 1x Wi-Fi Module 1x Auxiliary Input 1x MicroSD Card Slot 1x USB Slot 4x Push Fit Terminals for connecting speaker cable 1x 15V 2A Power Supply Connector Sleek & Minimalistic plastic body with rubber base. Push Release Speaker Terminals - Speaker Connections 4 to 8 ohm - Labelled; (R- & R+) for negative and positive connections to the right speaker(s), (L- & L+) for negative and positive connections to the left speaker(s). 3.5mm Auxiliary Input - For a direct wired connection to a source device such as a smartphone. Micro SD Card - The amplifier can also play MP3 tracks stored on a Micro SD Card.
Simply insert card at the bottom of the panel. USB Port - The amplifier can also play MP3 tracks stored on a USB stick. Output Impedance: 4 to 8 Ohms. Operating Voltage: 15V DC / 2A (Power Adapter Supplied) Frequency Response: 20Hz to 20 KHz Dimensions (HxWxD): 74x74x21mm Weight: 79.5g. Speakers Technical Specification: 2-Way Speakers Speaker Cable Connections Power Max 8 Ohm - 60w Power RMS 8 Ohm - 30w Sensitivity (1m, 1W) - 88DB Frequency Response - 120Hz-20kHz Impedance - 8 ohms Dimensions: Height 150mm, Width 105mm, Depth 105mm (Per Speaker).
1 Connect one end of the speaker cables to the amplifier using the screw fit terminals, and the other end to the supplied speakers If you have ordered a system with four speakers, simply wire two speakers to the left channel and two the right channel. This is called wiring in parallel and is well within the amplifier's tolerances. 2 Connect the power cable to the amplifier and the plug into a mains socket.4 You can now power up the unit, select a source and listen to your chosen music. 5 If you're wanting to use a wireless connection, see below on how to connect via Wi-Fi. Connecting to Wi-Fi: 1 On your smartphone / tablet, download the WiiM Legacy Player application by Linkplay Tech. For iOS devices, download the Legacy Player app from the App Store. For android devices, download the Legacy Player App from the Google Play Store.
2 Upon opening the Legacy Player app, a searching screen will be shown with an option to "Add Device" at the bottom of the screen. If the amplifier has already been connected to Wi-Fi network in the past, the searching screen will confirm it has found 1 or more devices. 3 Go to the Wi-Fi settings on your device to search for available networks, the amplifiers name will start with "smart audio".
Connect your device to the amplifier. 4 The next page on the app will ask you to select the Wi-Fi network that you would like to connect the amplifier too. Select your network and enter the password to connect the device.5 Once connected you will be able to name the new device. 6 You can now connect your device back to your local Wi-Fi network & start playing music via the Legacy Player Application. Further Information: We sell the amplifier in this bundle with various styles & numbers of speakers.
If this isn't quite what you are looking for and you can't find what you need, please feel to get in touch and we will be more than happy to help you. This item is in the category "Sound & Vision\Home Audio & HiFi Separates\Speakers & Subwoofers". The seller is "loopsdirect" and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Vietnam.