Outdoor Bluetooth Speaker Kit 2x 60W White Stereo Amplifier Garden BBQ Parties

  

Premium Outdoor Bluetooth Speaker System What's included in this kit. 1x 110W PREMIUM QUALITY Bluetooth Stereo Amplifier 2x 60W Premium 4 Inch White Wall Mounted Speakers & Brackets 25m Quality Outdoor Rated Speaker Cable (if you require more, please get in touch) Instruction Manuals.

1 We offer a premium quality audio system that will not be out of place in any garden or outdoor environment. 2 The outdoor speakers supplied are compact, powerful, offer impressive bass for their size and look great when installed unlike a lot of other outdoor speakers on the market that can look bulky when installed. 3 Everything you need is supplied with the system and no special & expensive tools are requires to connect everything together... Simply strip away a small end of the cable and insert into the speakers & amp. 4 Control the system with your Bluetooth device (mobile or tablet for example).

You can adjust the volume, skip tracks ETC all through your connected device. Not a problem at all, our amplifier has multiple inputs meaning you can connect any device with an audio output. This is brilliant for keeping the amplifier hidden away in a cupboard. Your device would NOT need line of sight to play music through the connected speakers. All aspects of this kit have been tested together so that we can guarantee the best possible audio quality.

You also have the freedom to alter the Bass & Treble as you wish using the controls on the front of the amplifier. You can then connect the amplifier to the 2x wall speakers via the supplied speaker cable. The speakers are supplied with an adjustable wall bracket which enables you to position the speaker in the perfect position. PLEASE NOTE - This is a stereo system meaning that 1 speaker will produce audio from the left channel and the other 1 will do the same for the right channel. 6 selectable line inputs 1x - Bluetooth receiver (wireless) 2x - 2 RCA/Phono (red & white) inputs 1x - 3.5mm AUX jack 1x - USB media input 1x - SD Card media input 2x 6.35mm Microphone inputs - Allows you to use as a loud hailer / public speaking / karaoke system 1x FM Antenna Connections 2x - spring terminal / speaker cable (red & black) outputs Built-in FM receiver Sleek and compact design Durable metal body with breathable air vents built in. UK mains power cable supplied Power Supply - 230V AC, 50Hz Power output max per channel at 4 Ohms - 55W (per side) Power output per channel at 4 Ohms - 35W (per side) Power output Max per channel at 8 Ohms - 40W (per side) Power output RMS per channel at 8 Ohms - 25W (per side) Dimensions - 200mm x 65mm x 200mm (WxHxD) Weight - 1700g.

PLEASE NOTE - This amplifier is not outdoor rated, so it would have be kept safe from the elements. This could be installed within an outdoor rated box as the amplifier is very compact.

You will have to remain within 10m of the amplifier to transmit a Bluetooth signal. IP44 weather resistant PP cone main driver Impedance - 8 OHM Power RMS - 30W Power MAX - 60W Bass driver size - 4 Inch (100mm) Tweeter size - 1/2 Inch (13mm) Frequency response - 100Hz - 20kHz Adjustable pan & tilt mounting bracket included Available in a white or black finish Dimensions - 195mm x 127mm x 126mm Weight of each speaker - 1.2KG. Double Insulated Outdoor Speaker Cable. 48 Strands with a 0.2mm diameter per core.

Area per core = 1.5mm Squared. Oxygen Free Copper conductors for the best quality signal. External Diameter of 8.5mm (Total).

UV Resistant & thick outer sheath makes this cable rated for outdoor use. Further Information - How to install: 1 - Connect the amplifier to the speakers. You need to run a length of the supplied cable from the amplifier to each speaker.

Using a pair of snips or a cable stripper... Strip back the outer layer of cable to reveal the two inner cores. Strip back the inner cores, around half an inch is OK. This will expose the copper strands. Twist the strands tightly and insert one end into the amplifier and the other end into the speakers ensuring that the red core plugs into the red terminal on the amp and speakers and the same for the black core... 2 - Now that you have connected the speakers to the amplifier, it's time to connect the amplifier to the mains, simply plug in the supplied power cable to the amplifier and a 240V Mains wall socket. 3 - Turn on the amplifier via the power switch on the front of the device 4 - Finally, connect your source device to the system. If you want to connect via Bluetooth. Set the amplifier to "Media Player" & press the "mode" button until the screen displays the word "Blue". Now enable Bluetooth on your device and commence a search. Select the amplifier and pair following the instructions on your device. Once paired, you can start streaming your music wirelessly. To connect via a wire, simply plug into the connections on the back and select the relevant source on the front of the amplifier... For example, if you plug a device into the connection labelled AUX, change the source wheel to select AUX. If you require any more speaker cable for your installation or would just like a chat about how this all works, please feel free to get in touch as we are always happy to help.