2 Way Stereo Speaker Splitter & Volume Control Hi Fi Loudspeaker Audio Switch

  

2-way Stereo Loudspeaker Switch & Volume Control Unit. Our splitter unit can be placed between an amplifiers output and two sets of stereo loudspeakers. This splitter has a volume control that allows you to control the volume of 1 pair of speakers. However, the amplifier that everything is connected to will act as a master volume control. The volume dial on this unit will allow you to drop the volume of 1 pair of speakers but the max limit is set at the amplifier.

Both pairs of speakers can be turned on / off individually using the switch. What you should know - It is normal to notice a volume drop per speaker when more than one pair of speakers is switched on. The switches on the front allow either just the main speakers to be on or the remote speakers. If both the switches are set to'off', to prevent your amp from blowing, the main speakers will come on. To switch off all speakers, your amp will need to be turned off too.

The volume for your main speakers can be controlled by your amplifier, the volume controls on this switch allow pair 2 to be turned up or down. Inputs Terminals: 1x Set 4mm banana terminals. Output Terminals: 2x Set 4mm banana terminals. RMS power per channel: 60W. Both sets of speakers can be turned on at the same time.

Compatible with 4 - 16 Ohm speakers. Size - 220mm (W) x 90mm (D) x 5mm (H).